How to configure static routing on your modem

Static routing allows you to add routers manually to the routing table.

Important note: If a change or a failure occurs between two nodes, traffic will not be rerouted until the problem is resolved by the administrator.

1. Connect a device, such as a computer or tablet, to the internet through WiFi or using an Ethernet cable connected to your modem.

2. Open a web browser and type http://192.168.0.1 into the web address field.

Enter the URL for the modem user interface

3. Log in to the modem's settings interface (Modem GUI) using your Admin Username and Admin Password. Note that these are different from your wireless network name (SSID) and WiFi password (security key).

Find the Admin Username & Password on the modem sticker

Log into the modem interface with the Administrator Username and Password

4. Select the Advanced Setup icon in the main menu.

5. Select "Static Routing" in the left sidebar.

6. Follow the steps to edit the Static Routing settings.

Step 1: Set the IP addressing type to IPv4 or IPv6, depending on your IP setup.
Step 2: Enter the Destination IP, Subnetmask, and Gateway IP.
Step 3: Click "Apply" to save your changes.